Fadeaway Varnish Desmoker
- Invisible Blend Finish
- For use with all coatings
- Suitable for quick repairs.
- Reduces polishing time.
- Convenient aerosol application means no waste
- Easy to use and quick drying
Areas of application
Fadeway is a mixing solvent for dissolving edges of varnishes, making a seamless transition between old and new varnishes. This aerosol mixing thinner is universally used as it is compatible with all branded varnishes, no spray gun required much faster.
Advantages
A specially formulated blend of solvents for fast and effective mixing of clearcoats. Produce seamless transitions on solid color and clearcoat mix panels for a virtually invisible repair. Ultra-fine, soft spray generates immediate results. Ideal for single-panel and multi-panel repairs.
Instructions for use
Shake the aerosol can for at least 2 minutes before use.Sand the mixing area with sanding soap or P800 - 1200 sandpaper to prepare the mixing area. Holding the aerosol spray approximately 20cm from the panel, apply a light layer of mist over the area bleed from freshly applied clear or finish. Apply 2-3 light coats of Fadeway immediately after clearcoat is applied to the edge of the blend. Follow the varnish or topcoat manufacturer's instructions for evaporation and drying,
Exclusivamente para clientes comerciais
Registe-se agora para ter acesso a mais de 15 100 produtos
Preços exibidos para clientes após o início de sessão
feedback Report comment